You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when
You need to configure an 802.1Q link on a Ezonexam switch. Which commands, when used together, would do this? (Select two answer choices)
A. Switch(vlan) mode trunk
B. Switch(config) switchport access mode trunk
C. Switch(config-if) switchport mode trunk
D. Switch(config-if) switchport trunk encapsulation dot1q
E. Switch(config) switchport access mode 1
F. Switch(vlan) trunk encapsulation dot1q
正確答案：CDC,D 解析：Explanation:Creating this trunk link is a two step process. First you have to set the switchport mode to trunk, and then you configure the encapsulation. The giveaway on this question is the fact that to create a trunk on an interface, you have t
詞條內容僅供參考，如果您需要解決具體問題
（尤其在法律、醫學等領域），建議您咨詢相關領域?qū)I(yè)人士。